Three-level Power Factor Correction Static Var Generator Cabinet 100kvar 150kvar 200kvar 250kvar 300kvar 500kvar 600kvar

Short Description:

Noker static var generator cabinet adopts the three level technology, used for three phase load unbalance, power factor correction, power harmonics filtering, effectively reduce line loss, and prolonging the life of power equipment.

Nokerstatic var generator cabinet is suitable to form a hybrid Var compensation(HVC) solution with capacitors and reactors Due to its high performance and most cost effective, it is widely used.


Product Detail

Product Tags

Video

Features

SVG cabinet checks the load current through the external CT and performs computing through the external DSP to analyze the reactive content of the load current. After that, it controls the PWM signal generator based on the settings to send control signals to the internal IGBT. In this way, it generates reactive compensation current to implement dynamic reactive power compensation.

1.Three-level inverter technology, high energy efficiency,
2.Integration of load balancing, power factor compensation, harmonics filtering into one module.
3.Built-in RS485 interface to control intelligent capacitor.

4.High-speed response, Overall response time <7.8ms
5.Load balancing and unloading of neutral wires
6.Flexibility and modularity.

svg
20220407093108_90355

Specification

Network voltage(V)                         220/400/480/690
Network voltage range -20%--+20%
Network frequency(Hz)

50/60(-10%--+10%)

Scope of compensation

Capacitive and inductive continuously adjustable

CT mounting method

Open or closed loop(recommend in parallel operation)

CT mounting position

Grid side/load side

Response time

10ms or less

Connection method

3-wire/4-wire

Overload capacity

110%Continuous operation, 120%-1min

Circuit topology

Three-level topology

Switching frequency(khz)

20kHz

Redundancy

Any unit can become a stand-alone unit

Unbalance governance

Available

SVC

Available

Display

No screen/4.3/7 inch screen(optional)

Capacity(kVar)                25、35、50、75、100、150
Harmonic range

2nd to 50th order 

Communication port

RS485

RJ45 interface, for communication between modules

Noise level

<56dB Max to <69dB(depending on module or load conditions)

Mounting type         Wall-mounted, rack-mounted, cabinet
Altitude

Derating usage>1500m

Temperature

Operating temperature: -45℃--55℃,  derating usage above 55℃

Storage temperature: -45℃--70℃

Humidity

5%--95%RH, non-condensing

Protection class

IP20

Certification

CE, CQC

Product display

AFP board

The static var generator cabinet adopts the hardware structure of FPGA, and the components are of high quality. Thermal simulation technology is used for thermal design of the system, and multi-layer PCB circuit board design ensures reliable isolation of high and low voltage, which provides guarantee for system safety.

Application

Noker power filter cabinet
filter cabinet

Where there is a low-voltage transformer installed and next to large electrical equipment should be equipped with reactive power compensation devices svg static var generator(this is the provisions of the national power department), especially those with low power factor industrial mines, enterprises, residential areas must be installed. Large asynchronous motors, transformers, welding machines, punches, lathes, air compressors, presses, cranes, smelting, steel rolling, aluminum rolling, large switches, electric irrigation equipment, electric locomotives, etc. In addition to incandescent lighting in residential areas, air conditioning, refrigerators, etc., are also reactive power consumption objects that can not be ignored. The rural electricity situation is relatively bad, most areas lack of power supply, voltage fluctuation is very large, power factor is especially low, installing compensation equipment is an effective measure to improve the power supply situation and improve the utilization rate of electric energy. Svg static var generator must the most ideal reactive power compensation device.

1.All types of industrial installations
2.Equipment using variable speed drive (VSD)
3.arcing equipment: electric arc furnace (EAF), ladle furnace (LF), and arc welding machine
4.Switching power supply: computer, TV, photocopiers, printer, air conditioner, PLC
5.UPS system
6.Data center
7.Medical equipment: MRI scanner, CT scanner, X-ray machine, and linear accelerator
8.Lighting equipment: LED, fluorescent lamp, mercury vapor lamp, sodium vapor lamp, and an ultraviolet lamp
9.Solar inverter and wind turbine generators

Customer service

1. ODM/OEM service is offered.

2. Quick order confirmation.

3. Fast delivery time.

4. Convenient payment term.

At present, the company is vigorously expanding overseas markets and global layout. We are committed to becoming one of the top ten export enterprises in China’s electrical automatic product, serving the world with high-quality products and achieving a win-win situation with more customers.

Noker SERVICE
Freight

  • Previous:
  • Next: